Toll Free:  1-877-420-3731
 (604) 420-3731, Fax (604) 420-9240
 Email

Home  |  About Us |  Industrial Products 
Anodes | Babbitt | Bricks, Blocks 
Pipe & Tube | Sheet Lead
 Reliance Sacrificial Anodes | Why Reliance

Anodes - Hard & Decorative Chrome, Anodizing,
Tin & Solder Electroplating, Hot Air Leveling,
Galvanizing, Metallizing

 

 

 

Raw Materials:
We utilize only the finest primary materials in the manufacturing of its products. Find below a list of the
raw metals that we alloy with to produce any configuration you require.
  • Tin (Sn):    Complies to ASTM B339 - Grade "A" Tin.
  • Lead (Pb):   Complies with ASTM B29 - Corroding Grade Lead.
  • Antimony (Sb):   Complies with ASTM B237 - Grade "B" Antimony.
  • We also produce alloys with additions of Silver (Ag), Bismuth (Bi), and Aluminum (Al).

Standard Cast Configurations:
We offer a vast choice of cast or extruded anodes in a wide range of configurations. That is why we are one of the leading suppliers to the plating industry. We understand that everything is not always standard off the shelf, if you don't see what you are looking for, give us a call and let us help you out.
Sample Picture Configuration Name Dimensions Metal
Anode-Cadmium Balls.jpg (14464 bytes) BALLS 3/4", 1", 2"
Diameter		 Tin
Lead
Tin/Lead Alloys
Anode-Big Grid.jpg (17700 bytes) GRIDS  1/4" x 12" x 24",
1/2" x 13" x 24-1/2"		 Tin
Lead
Tin/Lead Alloys

Standard Extruded Configurations:
Whether extruded or hand cast in our wide range of alloys and configurations, each of our anodes go through the same process to produce a fine grain structure essential for even plate-out and maximum throwing.
Sample Picture Configuration Name Dimensions Metal
Anode-Round.jpg (15158 bytes) ROUND 1/8" - 4" Dia
Various Lengths		 Tin
Lead
Tin/Lead Alloys
  • We also produce Lead anodes with cores such as copper, mild steel to name a few.
  • All our Lead Alloyed Anodes are available with either Cast Bronze or Copper Hooks, which are cast into nobbins and lead burned onto the anode stock. (All nobbin & burning bar used in homogenous bonding are of the same alloy as the anode stock).
  • Tin & Tin/Lead (Solder) Anodes are supplied drilled with a 3/8" Diameter hole and tapped (16 thread) to 1-1/4" Deep.

Anode Hooks:
This is a list of our most common bronze hooks. Copper hooks are available upon request. All hooks can be Plastisol covered or Lead covered, just let us know in advance.
Sample Picture Hook Number & Style Dimensions Metal
#1 Single Knife Edge From Top of Conductor Bar to
 Anode Shoulder: 3-1/2"
Knife Edge: 1/2" Thick		 "C" BRONZE
#2 Single Knife Edge From Top of Conductor Bar to
 Anode Shoulder: 3-1/2"
Knife Edge: 5/8" Thick		 "C" BRONZE
#3 Single Knife Edge From Top of Conductor Bar to
Anode Shoulder: 3-1/2"
Knife Edge: 3/4" Thick		 "C" BRONZE
#7 Double Knife Edge From Top of Conductor Bar to
Anode Shoulder: 3-1/2"
Knife Edge: 5/8" Thick		 "C" BRONZE
#8 Double Knife Edge From Top of Conductor Bar to
Anode Shoulder: 4-1/2"
Knife Edge: 5/8" Thick		 "C" BRONZE
#9 Double Knife Edge From Top of Conductor Bar to
Anode Shoulder: 8-1/2"
Knife Edge: 1/2" Thick 		 "C" BRONZE

Available Plastisol Colors:

Custom Basket Anodes:
 
Sometimes referred to as Basket, Conforming or Grid anodes.  Send us your drawings and we will be happy to assist you.

Some important items we need to know are:
  • Alloy Material
  • Are you ID or OD Plating?
  • Overall Height
  • Inside or Outside Diameters
  • Hanger Information:  Solid Lead, Lead covered Copper etc.

 

 

 


© 2007 Metal Distributors, Ltd.  7220 Winston Street, Burnaby, BC, Canada V5A 2G9
All rights reserved.  Reliance is a trademark of Metal Distributors, Ltd.